LARGE WATER SYSTEM
2018 ANNUAL REPORT TO THE DRINKING WATER PROGRAM
FOR YEAR ENDING DECEMBER 31, 2018
[Section 116530 Health & Safety Code]

WATER SYSTEM INFORMATION
Water System No.:	CA1910079
Water System Name:	LYNWOOD-CITY, WATER DEPT.
Water System Ownership (See descriptions below):	--Pick one-- Local Government State or Federal Government Privately owned, PUC-regulated, for profit water company Privately owned, non-PUC-regulated (Community Water System) Privately owned Mutual Water Company or Association Privately owned business (non-community)
Physical location:   (address line 1, address line 2, city, zip) Note: NO P.O. Box	11330 BULLIS ROAD LYNWOOD 90262
General Office Phone: (with area code)
Web site address:	www.lynwood.ca.us

BOXES COLORED YELLOW ARE MANDATORY QUESTIONS AND MUST BE ANSWERED TO COMPLETE THIS REPORT

Water System Ownership Descriptions:

• Local Government: e.g., city, county, or special district, local school district, junior colleges, county or community parks, etc.
• State or Federal Government: e.g., state or national park, BLM, USFS and COE campgrounds and recreation facilities,
  state hospitals, State universities and colleges, California Veterans Home, County or District Fairs and Expositions,
  Caltrans rest stop, military base, other state or federal facility
• Privately owned, non-PUC-regulated (Community Water System): e.g., mobile home park, apartment or condominium
• Privately owned business (non-community): e.g., church, private school, restaurant, amusement park, RV park/campground,
  motel, ranch/farm, factory, other business establishment

COMMUNITY WATER SYSTEMS ONLY

Your water system classification is: Community Water System

IF YOU ARE NOT A COMMUNITY WATER SYSTEM, SKIP THIS SECTION

CERTIFICATION FOR REDUCTION OF ANNUAL FEES FOR PUBLIC WATER SYSTEMS SERVING A DISADVANTAGED COMMUNITY (DAC)

By checking this box, you are a community water system who would like to request a fee reduction and is serving a DAC as defined in Title 22, Division 4, Chapter 14.5, section 64300 of the California Code of Regulations OR has previously submitted documentation to the State Water Resource Control Board certifying that you are serving a DAC.

To request a DAC fee reduction or to continue receiving a reduced annual fee you must complete a DAC certification form and upload the form to the “DAC” tab for the State Water Resources Control Board to review.

Click HERE for instructions on how to upload your completed DAC certification form. To upload a DAC Certification Form, click HERE

If you have questions about completing this section of the report, please contact the Program Liaison Unit at DDW-PLU@waterboards.ca.gov or call (916) 449-5158.

REPORT SUBMITTED BY:
Note: Your name and title, email address, and work phone number are disclosable report information that may be obtained through the Public Records Act.
Name:	George Cambero
Title:	Water Manager
Work phone:	3106030220
Cell phone:
Email address:	gcambero@lynwood.ca.us

Please be aware that all comment boxes throughout this electronic annual report will be made publicly available WITH THE EXCEPTION of the comment box below. Only Waterboard staff and other people with your water system’s DRINC login credentials will have access to this comment box. You are encouraged to provide any comments that you believe may help improve this annual report process.

PRIVATE COMMENTS:

1. Public Water System Contacts

Click here to learn how to Modify, Add and Delete Contacts in the table below.

IMPORTANT: Each water system must have one and only one Administrative Contact AND one and only one Financial Contact. The same person may be both the Administrative and Financial Contacts.

Please provide an email address for the Administrative Contact as most email communication, particularly email blasts, from the Division of Drinking Water will be sent to the email address of the Administrative Contact.
PHONE TYPE: Home – if you use your home or personal phone number as your business number, use the HOME phone type instead and leave the BUSINESS phone type blank.
Only the BUSINESS phone type will appear in Drinking Water Watch (https://sdwis.waterboards.ca.gov/PDWW/), which can be viewed by the public, if the General Office phone number is not provided (see Water System Information section under the Intro tab).

NAME, TITLE & ADDRESS			PHONE TYPE	PHONE NO.	EMAIL	CONTACT TYPE (pick all that apply)
KADEL, BRET			Business Home	951-202-6604	bkadel@lynwood.ca.us	** Delete Contact ** Administrative	Operator
CHIEF OPERATOR D5			Facsimile	310-632-9511		Financial	Emergency
11330 BULLIS ROAD			Mobile			Designated Operator In Charge	Water Quality
LYNWOOD  CA  90262			Emergency			Owner	Legal
						Funding	Contract Operator
HEMPE, LORRY			Business Home	310-603-0220	LHEMPE@LYNWOOD.CA.US	** Delete Contact ** Administrative	Operator
MANAGER,SPECIAL PRJ.			Facsimile	310-632-9511		Financial	Emergency
11330 Bullis Road			Mobile	310-701-8992		Designated Operator In Charge	Water Quality
LYNWOOD  CA  90262			Emergency			Owner	Legal
						Funding	Contract Operator
MENDEZ, SALVADOR			Business Home	310-603-0220		** Delete Contact ** Administrative	Operator
DIRECTOR,PUBLIC WORK			Facsimile			Financial	Emergency
11330 BULLIS RD			Mobile	310-807-4845		Designated Operator In Charge	Water Quality
LYNWOOD  CA  90262			Emergency			Owner	Legal
						Funding	Contract Operator
CAMBERO, GEORGE			Business Home	310-603-0220	GCAMBERO@LYNWOOD.CA.US	** Delete Contact ** Administrative	Operator
SHIFT OPERATOR			Facsimile	310-632-9511		Financial	Emergency
11330 BULLIS RD			Mobile	951-285-9789		Designated Operator In Charge	Water Quality
LYNWOOD  CA  90262			Emergency			Owner	Legal
						Funding	Contract Operator
			Business Home			** Delete Contact ** Administrative	Operator
			Facsimile			Financial	Emergency
			Mobile			Designated Operator In Charge	Water Quality
			Emergency			Owner	Legal
						Funding	Contract Operator
			Business Home			** Delete Contact ** Administrative	Operator
			Facsimile			Financial	Emergency
			Mobile			Designated Operator In Charge	Water Quality
			Emergency			Owner	Legal
						Funding	Contract Operator
			Business Home			** Delete Contact ** Administrative	Operator
			Facsimile			Financial	Emergency
			Mobile			Designated Operator In Charge	Water Quality
			Emergency			Owner	Legal
						Funding	Contract Operator
			Business Home			** Delete Contact ** Administrative	Operator
			Facsimile			Financial	Emergency
			Mobile			Designated Operator In Charge	Water Quality
			Emergency			Owner	Legal
						Funding	Contract Operator
Add Additional Contact						(pick all that apply)
William Stracker			Business	310-603-0220	wstracker@lynwood.ca.us	Administrative	Operator
Interim Director of Public Works			Home			Financial	Emergency
11330 Bullis RD --Address Line 2--			Facsimile Mobile			Designated Operator In Charge	Water Quality
Lynwood  CA  90262			Emergency			Owner	Legal
						Funding	Contract Operator
Add Additional Contact						(pick all that apply)
Run Chen			Business	310-603-0220 xt 829	rchen@lynwood.ca.us	Administrative	Operator
Public Works Director			Home			Financial	Emergency
--Address Line 1-- --Address Line 2--			Facsimile Mobile			Designated Operator In Charge	Water Quality
--City--  --ST--  99999			Emergency	(999) 999-9999		Owner	Legal
						Funding	Contract Operator
Add Additional Contact						(pick all that apply)
--Contact Name--			Business	(999) 999-9999	XXXXX@XXXXX.XXX XXXXX@XXXXX.XXX	Administrative	Operator
--Title--			Home	(999) 999-9999		Financial	Emergency
--Address Line 1-- --Address Line 2--			Facsimile Mobile	(999) 999-9999		Designated Operator In Charge	Water Quality
--City--  --ST--  99999			Emergency	(999) 999-9999		Owner	Legal
						Funding	Contract Operator
Add Additional Contact						(pick all that apply)
--Contact Name--			Business	(999) 999-9999	XXXXX@XXXXX.XXX XXXXX@XXXXX.XXX	Administrative	Operator
--Title--			Home	(999) 999-9999		Financial	Emergency
--Address Line 1-- --Address Line 2--			Facsimile Mobile	(999) 999-9999		Designated Operator In Charge	Water Quality
--City--  --ST--  99999			Emergency	(999) 999-9999		Owner	Legal
						Funding	Contract Operator

COMMENTS (Note: Comments will be made publicly available):

2. POPULATION SERVED

Permanent population or number of long-term residents*:

69772

*Long-term resident means someone who resides within the water system service area for more than half of the year.

Method used to determine population:

--Pick one-- Most recent United States census data Multiplied number of service connections by 3.3 Determined total number of dwelling units and multiplied by 2.8 Other

If permanent population is based on "Other" , identify the methods or sources of how it was estimated::

https://factfinder.census.gov/faces/nav/jsf/pages/community_facts.xhtml?src=bkmk

Seasonal Maximum Population (If applicable):

Provide season :

Begin Date		End Date
MM	DD	MM	DD

List the names of communities served by the system identifying both incorporated and unincorporated areas:

COMMENTS (Note: Comments will be made publicly available):

3. NUMBER OF SERVICE CONNECTIONS(as of December 31, 2018)

A. Active Service Connections:

Total Active Potable Water Connections currently in Division of Drinking Water database:

9089

The total number of Service Connections as of December 31, 2018 must be reported as either Unmetered or Metered for each Service Connection Type as appropriate.

	Potable Water			Recycled Water
TYPE Do NOT report fire sprinkler connections and fire hydrants. These connections are not counted toward “service connections” for compliance purposes.	Unmetered	Metered	Total*	Unmetered	Metered	Total*
Single-family Residential: single family detached dwellings	0	6544	6544	0	0	0
Multi-family Residential: Apartments, condominiums, town houses, duplexes and trailer parks	0	1161	1161	0	0	0
Commercial/Institutional: Retail establishments, office buildings, laundries, schools, prisons, hospitals, dormitories, nursing homes, hotels, churches	0	1476	1476	0	0	0
Industrial: All manufacturing	0	0	0	0	0	0
Landscape Irrigation: Parks, play fields, cemeteries, median strips, golf courses	0	0	0	0	0	0
Agricultural Irrigation: Irrigation of commercially-grown crops	0	0	0	0	0	0
Total Active Connections*	0	9181	9181	0	0	0

*Calculated field

	Potable Water			Recycled Water
TYPE	Unmetered	Metered	Total*	Unmetered	Metered	Total*
Other: Fire suppression, street cleaning, line flushing, construction meters, temporary meters	0	3	3	0	5	5

B. Number of Inactive Connections (all types) Include only service connections that have been physically disconnected (e.g, meter removed) from the water system. All other service connections should be considered as “Active.”

0

C. Number of NON-residential customers required to have dedicated outdoor irrigation meters (excluding agricultural connections)

0

COMMENTS (Note: Comments will be made publicly available):

4. GROUNDWATER (GW) AND SURFACE WATER (SW) SOURCES

Type	Total No. Approved (by permit)	Total No. New/ Added in 2018	Total No. Inactivated in 2018	Total No. Destroyed in 2018
Active Groundwater Intakes (Wells)	5	0	0	0
Active Surface Water Intakes (Raw)	0	0	0	0
Active Purchased Water (GW) Connections	0	0	0	0
Active Purchased Water (SW) Connections	1	0	0	0
Standby Sources1	0	0	0	0
Emergency Interconnections	5	0	0	0
Inactive Sources2	0		0	0

Are your water sources metered?	--Pick one-- Yes No
Do you routinely monitor the static water levels in your wells?	--Pick one-- Yes No Not Applicable (no wells)
Do you routinely monitor the pumping water levels in your wells?	--Pick one-- Yes No Not Applicable (no wells)
Are these levels recovering, declining or steady?:	--Pick one-- Recovering Declining Steady Not Applicable (no wells)

¹If a standby source was used in 2018, provide the following information.

Name of the Standby Source used in 2018:	No. of days the Standby Source was in operation:	Were customers notified? (Y/N)	Was the Division of Drinking Water notified? (Y/N)	Describe the reason the Standby Source was used:

²Inactive sources are not approved as sources of supply and must be physically disconnected or similarly isolated.

COMMENTS (Note: Comments will be made publicly available):

5. WATER PRODUCED, PURCHASED AND SOLD

The Maximum Day is the day during 2018 with the highest total water usage. Provide the date for that day in Column B,
then complete Columns C, D and E, indicating how much of the water on that day was from each source.

Units of Measure for this table: --Pick one-- Gallons Million Gallons Acre-feet (AF) 100 cubic feet

Volumes are based on: --Pick one-- METERED VOLUMES ESTIMATED VOLUMES

A	B	C	D	E	F	G	H	I
	Potable Water						Non-potable (exclude recycled)	Recycled
	Date/ Month	Water Produced from Groundwater (Wells)	Water Produced from Surface Water2	Finished Water Purchased or Received from another PWS5	Total Amount of Potable Water3*	Water Sold to Another PWS5
Maximum Day1	n/a				0
January		418.44	0	1.30	419.74	0	0	1.74
February		385.02	0	1.30	386.32	0	0	3.62
March		394.72	0	1.30	396.02	0	0	1.04
April		508.25	0	1.30	509.55	0	0	2.12
May		458.55	0	1.30	459.85	0	0	3.68
June		463.11	0	1.30	464.41	0	0	2.59
July		511.88	0	1.30	513.18	0	0	3.25
August		506.42	0	1.30	507.72	0	0	3.48
September		464.89	0	1.30	466.19	0	0	5.95
October		453.13	0	1.30	454.43	0	0	4.88
November		421.92	0	1.30	423.22	0	0	6.94
December		395.98	0	1.30	397.28	0	0	5.80
Annual Total*		5382.31	0	15.6	5397.91	0	0	45.09
Percent Treated4

PWS = Public Water System

^*Calculated field

Non-potable = water supplies, except recycled water, that do not enter the drinking water distribution system and are for non-potable uses only such as irrigation

Recycled = domestic wastewater which as a result of treatment is suitable for uses other than potable use such as irrigation or toilet flushing

¹Only report Maximum Day if it is actually measured or determined from production records. It should not be the average day demand during
the maximum month of production.

²Do not include raw water purchased; report only volume of water that was treated.

³(F) Total Amount of Potable Water = Sum of Columns (C), (D) and (E), automatically calculated. Total water production includes water that is sold to another water system. To update, click below

⁴This is the percentage of the total annual volume for Groundwater produced that was provided treatment to meet drinking water standards other than precautionary disinfection and fluoridation.

⁵If water was Purchased from or Sold to another PWS, complete the table below:

Specify whether water was Purchased or Sold	Name of PWS
Metropolitan Water District

If recycled water was supplied to your customers, complete the table below:

Specify the level of treatment (e.g., tertiary, disinfected secondary)	Name of Recycled Water supplier
Tertiary treatment, microfiltration and reverse osmosis	Central Basin Municipal Water District

COMMENTS (Note: Comments will be made publicly available):

6. WATER RATES AND DELIVERIES

A. WATER RATES

If you have questions about completing this section of the report, please contact Kathy.Frevert@Waterboards.ca.gov, 916-322-5274 or Mary.Yang@Waterboards.ca.gov, 916-322-6507.

A1. Residential Water Rates

A1.a. Indicate the type of residential water rate structure used by your water system (select those that apply):

Base Rate – (Non-Volumetric Rates)

Fixed Base Rate - Basic or fixed charge that is the same for all customers regardless of use.

Variable Base Rate - Basic charge is different for customers depending on size of pipe, water meter, elevation, peak use, or other factors.

Usage Rate (Volumetric Rates)

Uniform Usage Rate - The charge per 100 cubic feet of water is the same regardless of use.

Variable Usage Rate - Increasing Block or Tier Rate. The charge per 100 cubic feet or other increment of water increases as water use increases.

Other Rates

Flat Rate (often unmetered)- One rate for providing drinking water regardless of the volume of water used, not combined with a usage rate.

If you have a Flat Rate, please skip questions A1.b, A1.d, A1.f, A1.g and A3. Enter your flat rate in A4.

Allocation Based

Other rate structure (specify your rate structure in the comment box, provide a weblink 1j below)

We do not charge a water rate (explain in next question)

A1.b. If your water system doesn’t have rates, explain why: --Pick one-- Supplier is educational facility with its own water source Supplier is an institutional facility with its own water source Supplier is business with its own water source Supplier is park or recreational facility with its own water source Other (explain in comment box below))

  Comments on rate structure (Note: Comments will be made publicly available):  

If you are a water supplier without water rates, check this box , then move to Section 6B Water Deliveries.

A1.c. What is your billing frequency?	--Pick one-- monthly bi-monthly quarterly annually other
A1.d. If charges change with different levels of water consumption or features, what is the number of tiers or levels of charges?	--Pick one-- Not Tiered 2 3 4 5 6 7
A1.e. Identify any aspects or factors used to determine or adjust residential water rates (mark those that apply).
Agricultural use (non-commercial or commercial)
Elevation
Evaportive Coolers
Fire protection - water to irrigate vegetation
Home-based business
Livestock or large animals
Lot size
Medical needs
Meter size
Mitigation of high levels of total dissolved solids
Occupancy (All-year)
Occupancy (Seasonal)
Pressure zone
Soil compaction and dust control
Supplement ponds and lakes to sustain wildlife
Other :
None of the above
A1.f. Units of Measure (UOM) for this table on Residential Water Rates:	--Pick one-- Gallons (Gal) Hundred Cubic Feet Thousand Gallons Million Gallons Acre Feet Not Applicable

A1.g. Table on Residential Water Rates, Single-family and Multi-family

If your water system uses an allocation or flat base rate structure, add a direct weblink to more information on your rate structure (A1.j), provide information in the box “Comments on Residential Rate Structure”(A1.k), and leave this table blank.

	Provide information on residential water rates based on consumption. If a feature of your rate structure, (e.g., meter size, elevation, or other) affects water rates, provide the water rate associated with the most common situation. Enter zero “0” if not applicable. See examples
	Single-family		Multi-family
	Upper volume of water included in base rate in Units of Measure (UOM) If there is no base rate or volume of water associated with a base rate, enter the number zero “0”.	Cost per Billing Period (Dollars)	Upper volume of water included in base rate in Units of Measure (UOM) If there is no base rate or volume of water associated with a base rate, enter the number zero “0”.	Cost per Billing Period (Dollars)
Base Rate (non-volumetric rates)	3.63	0	0	0
Usage Rate (volumetric rates) The rows that follow do not include a base rate or fixed charge.	Upper level of water volume for each level in UOM	Cost per UOM (Dollars)	Upper level of water volume for each level in UOM	Cost per UOM (Dollars)
Rate Structure level 1	0	0	0	0
Rate Structure level 2	0	0	0	0
Rate Structure level 3	0	0	0	0
Rate Structure level 4	0	0	0	0
Rate Structure level 5	0	0	0	0
Rate Structure level 6	0	0	0	0
Rate Structure level 7	0	0	0	0

A1.h. Date of most recent update to the rate structure: MM/DD/YYYY	6-15-2017
A1.i. Describe the changes to rate changes that were made in the update:	Rate Increase
A1.j. Provide a direct link to a web page that explains water rates and fees, if available.
A1.k. Comments on Residential Rate Structure. Explain allocation rate, if applicable.

A2. RESIDENTIAL SERVICE CONNECTIONS

A2.a. Select the most common single-family residential meter size:	--Pick one-- 3/4 inch 5/8 inch 1 inch other not applicable
A2.b. Select the most common multi-family residential meter size:	--Pick one-- 1/2 inch 5/8 inch 3/4 inch 1 inch 2 inch other not applicable
A2.c. What is, approximately, the service connection fee for single-family brand-new construction based on the most common meter size listed above ($)?	1381.25
A2.d. Date of most recent update to the new connection fee for single-family brand-new construction: MM/DD/YYYY	6-15-2017
A2.e. What is the one-time connection fee to open a new account for an existing single-family home based on the most common meter size indicated above ($)?	99.00
A2.f. What is, approximately, the connection fee for multi-family new construction based on the most common meter size indicated above ($)?	1381.25

A2.g. Check items included in new residential connection fees:

	Existing infrastructure buy-in (e.g., water treatment/ conveyance/sewage treatment )
	Upgrades to infrastructure (seismic retrofits, pipe replacements, etc.)
	Storm water management system
	Debt service charge
	Development of new water supplies
	Other :

A2.h. Comments on Residential Service Connections (publicly available):  

A3. NON-RESIDENTIAL WATER RATES

A3.a. Select the most common non-residential meter size: --Pick one-- 3/4 inch 5/8 inch 1 inch 1.5 inch 2 inch other not applicable

A3.b. Complete the table below providing specific water rates applied to your non-residential customers:

Connection Type	BASE RATE (BR)	If BR + UUR, what is the volume allowed before UUR applies	UNIFORM USAGE RATE (UUR)	VARIABLE BASE RATE (provide range) (VBR)		VARIABLE USAGE RATE (provide range) (VUR)
	$ (Base)	HCF	$ per HCF	$ Low	$ High	$ per HCF Low	$ per HCF High
Commercial	3.63	0	0	0	0	0	0
Institutional	3.63	0	0	0	0	0	0
Industrial	3.63	0	0	0	0	0	0
Landscape Irrigation	3.63	0	0	0	0	0	0
Agricultural Irrigation	3.63	0	0	0	0	0	0
Other	3.63	0	0	0	0	0	0

Comments on non-residential water rates (publicly available):  

A4. AFFORDABLE DRINKING WATER

For each amount of water delivered to a single-family residential customer shown below, what is charged (in dollars) to a customer?

For each of the three water volumes shown below, provide what would be the monthly water bill for a single-family residential customer. Enter the monthly Water Charges and Other Charges for each water volume. For example, if a single-family customer used 12 HCF in a month, the total bill would include water charges for using 12 HCF and other charges that are added to the bill. Other charges vary locally and may include property tax, city tax, utility users tax, services for fire suppression, waste water or sewer, stormwater or other non-water surcharges. If the “other charges” varies by certain features (e.g., by climate, lot size, landscaped area) use the lowest charge in your calculation. Click the “Update Totals” button to automatically add the charges together to show a Total Monthly Water Bill that a residential customer would pay when its household used the specified amount of water.

A4.a. 6 HCF
Drinking Water Charges (Fixed and variable water charges)	21.78	Dollars/month
Other Charges (e.g., property tax, fire suppression, waste water, other)	61.80	Dollars/month
Total Monthly Water Bill (Automatic sum of Water Charges and Other Charges)*	83.58	Dollars/month
A4.b. 12 HCF
Drinking Water Charges (Fixed and variable water charges)	63.76	Dollars/month
Other Charges (e.g., property tax, fire suppression, waste water, other)	63.76	Dollars/month
Total Monthly Water Bill (Automatic sum of Water Charges and Other Charges)*	127.52	Dollars/month
A4.c. 24 HCF
Drinking Water Charges (Fixed and variable water charges)	87.12	Dollars/month
Other Charges (e.g., property tax, fire suppression, waste water, other)	67.68	Dollars/month
Total Monthly Water Bill (Automatic sum of Water Charges and Other Charges)*	154.8	Dollars/month

*If “Other Charges” varies, (e.g., by climate, lot size, landscaped area, or other features) use the lowest charge in your calculation.

Calculated field: To update calculated field, click button below

Comments on Affordable Drinking Water(publicly available):  

A5. SHUT-OFFS

Completing this section will fulfill the 2018 requirements of Senate Bill 998 – Discontinuation of residential water service.

Click the “Update Totals” button to automatically add the Single Family and Multifamily Accounts

Community Water Systems that have water rates and more than 200 connections must complete this section. If your community water system does not meet these criteria for completing this Section, then you must mark the boxes “did not collect information” below in order to avoid completion errors.

If a water supplier tracks the number of services connections but did not collect information on whether residences were occupied or unoccupied at the time of disconnection, put the total number of disconnections in the “unknown accounts” column in the tables in this section.
If a water supplier does not differentiate between single-family or multi-family, then enter all information as single-family.

A5.a. How many accounts for residential service connections had their water shut off once during the year of 2018 due to failure to pay?

If there was no information collected for question A5.a, mark the check box “Did not collect information" and skip below table.

	Occupied Accounts	Unoccupied Accounts	Unknown Accounts	Total*
Single-Family Accounts	0	0	0	0
Multi-family Accounts	0	0	0	0

A5.b. How many accounts for residential service connections had their water shut off more than once during 2018 due to failure to pay?

If there was no information collected for question A5.b, mark the check box “Did not collect information" and skip below table.

	Occupied Accounts	Unoccupied Accounts	Unknown Accounts	Total*
Single-Family Accounts	0	0	0	0
Multi-Family Accounts	0	0	0	0

A5.c. What is the residential reconnection fee to restore drinking water service due to failure to pay during operating hours?

Single-Family Accounts
Multi-family Accounts

A5.d. What is the residential reconnection fee to restore drinking water service due to failure to pay during non-operating hours?

Single-Family Accounts
Multi-Family Accounts

A5.e. What was the median duration of the shut-offs (in days) for continuously occupied residential service accounts?

If there was no information collected for question A5.e, mark the check box “Did not collect median duration of shut-offs (in days) for occupied residents" and skip below table.

	Occupied Accounts	Unoccupied Accounts	Unknown Accounts	Total*
Single-Family Accounts				0
Multi-Family Accounts				0

A5.f. If you offer an extended repayment or other customer payment assistance plan, how many continuously occupied residential customer accounts participated?

Single-Family Accounts
Multi-family Accounts
Total*	0

A5.g. How many of the continuously occupied residential accounts were shut off at least once during calendar year 2018 and were enrolled in an extended repayment plan or other customer payment assistance plan at the time of the service disconnection?

Single-Family Accounts
Multi-family Accounts
Total*	0

*Calculated field, to update calculated field, click button below

A5.h. Do you have a written policy on discontinuation of residential service? --Pick one-- Yes No

A5.i. Comments on Shut-offs (publicly available):  

A6. Affordable Drinking Water Assistance

A6.a. Do you provide options for low-income assistance?	--Pick one-- Yes No
A6.b. If yes, how was the program funded?
A6.c. How much funding was allocated to the program in 2018?
A6.d. What form of benefit was given per account (dollar amount, percentage, or volume) and how much?
A6.e. How many residential accounts received the low-income subsidy?
A6.f. What are the eligibility criteria to qualify for assistance?
Disabled
Low Income Families
Seniors
Special Medical Need
Other Please describe:

A6.g. At this time, does your agency have a policy to allow for alternative payment? --Pick one-- Yes No

Comments on Affordable Drinking Water Assistance (publicly available):  

B. WATER DELIVERIES

Units of Measure (UOM) for this table: --Pick one-- Gallons Million Gallons Acre-feet (AF) 100 cubic feet

Provide monthly metered water deliveries for all water sources (potable and non-potable) in the table below.

A	B	C	D	E	F	G	H	I	J
	Single-family Residential	Multi-family Residential	Commercial/ Institutional	Industrial	Landscape Irrigation	Other	Total Urban Retail1*	Agricultural	Other PWS
Check if Recycled Water is included:
January	209.01	0	11.53	128.47	0	1.74	350.75	0	0
February	207.27	0	26.02	173.30	0	3.62	410.21	0	0
March	183.50	0	7.13	167.73	0	1.04	359.4	0	0
April	183.11	1.33	22.38	136.20	0	2.12	345.14	0	0
May	197.87	.73	7.94	148.81	0	3.68	359.03	0	0
June	235.60	1.50	28.78	185.94	0	2.59	454.41	0	0
July	215.99	0.84	11.57	161.64	0	3.25	393.29	0	0
August	270.05	1.59	33.27	177.37	0	3.48	485.76	0	0
September	269.63	0.96	17.87	178.83	0	5.95	473.24	0	0
October	280.36	1.50	35.74	184.46	0	4.88	506.94	0	0
November	141.57	38.28	23.62	155.81	0	6.94	366.22	0	0
December	165.43	42.77	28.16	171.53	0	5.80	413.69	0	0
Total*	2559.39	89.5	254.01	1970.09	0	45.09	4918.08	0	0

PWS = Public Water System

^*Calculated field

¹Total Urban Retail = Sum of Columns (B) thru (G), automatically calculated. To update, click below

COMMENTS (Note: Comments will be made publicly available):

7. WATER QUALITY

Date of Emergency Notification Plan:	5-1-2019
Is the Emergency Notification Plan up to date?	--Pick one-- Yes No

DIRECT ADDITIVES

Pursuant to Section 64590, Title 22 of the California Code of Regulations, (effective January 1, 1994), all chemicals or products, including chlorine,
added directly to the drinking water as part of a treatment process must meet the ANSI/NSF Standard 60. Please complete the following table
for each chemical used by this water system. If you are not sure whether a chemical you are using meets this standard, contact the manufacturer
or distributor of the chemical.

If you do not use any direct additives, put “NONE” in each column of the first row.

Name of Chemical	Name of Manufacturer	Purpose of using chemical	Chemical is ANSI/NSF Standard 60 certified (Y/N)	Use initiated in 2018 (Y/N)
Sodium Hypochlorite	Waterline Technologies	Disinfection	Y	Y

INDIRECT ADDITIVES

As of March 9, 2008, a water system shall not use any chemical, material, lubricant, or product in the production, treatment or distribution
of drinking water that comes in contact with the drinking water that does not have certification of meeting NSF/ANSI standard 61.

Does your water system have procedures to ensure all future equipment and materials meet this standard?

--Pick one-- Yes No

If you have any questions on the requirements related to indirect additives, you may contact your local regulatory agency.

COMMENTS (Note: Comments will be made publicly available):

8. CROSS-CONNECTION CONTROL

	Total Number in System in 2018 ¹	Number Installed in 2018	Number Tested in 2018 ²	Number Failed in 2018	Number Repaired/ Replaced
Backflow Assemblies on the Service Connections or Meter (Reduced Pressure Principle and Double Check Valve assemblies)	288	2	288	25	25
Backflow Assemblies On- site but not on the Service Connections or Meter (Reduced Pressure Principle and Double Check Valve assemblies)	0	0	0	0	0
Air-gap Separation	0	0

Notes:

¹ Total Number in System in 2018 – Total number of active Backflow Prevention Assemblies including new devices installed in 2018, but excluding inactive devices.
² Number Tested in 2018 – includes all active devices that were tested in 2018 and either passed or failed.

No. of Inactive Backflow Prevention Assemblies in water system in 2018 :			0
Date of last cross-connection control survey done on the system: If ongoing, enter the last day of the year, e.g., 12/31/2018			10-22-15
Cross Connection Control Program Coordinator
Name:			Thomas White
Certification Number:			10564
Business Phone:	(888) 277-4677	Email Address:	cornell@waterworkstechnology.com
Certification or training received: Certification or training received: Certification received for Cross Connection Control Specialist was conferred by American Water Works Specialist. AWWA, 755 Corporation Yard Way, Corona, CA 92880

Describe any cross-connection incidents that occurred during 2018:

COMMENTS (Note: Comments will be made publicly available):

9. OPERATOR CERTIFICATION

A. Please list the State certified Water Treatment Plant Operators employed by your water system that supervise and direct the operation
of your water treatment plants, beginning with the chief operator(s) .

Your Highest Treatment System Classification is: Treatment or Distribution operator at any level

Check this box if your public water system has designated a Chief Treatment Operator.

Name of Chief Treatment Operator (First name Last name):	Bret Kadel
Grade of Chief Treatment Operator (1, 2, 3, 4 or 5):	5
Treatment Operator Number (4 or 5 digits):	22792
Treatment Certification Expiration Date (MM/DD/YYYY):	2/1/2022

Treatment Operator Name (First name Last name)	Grade of Treatment Operator (1, 2, 3, 4, or 5)	Chief or Shift1 (C, S or X)	Treatment Operator Number (4 or 5 digits)	Treatment Certification Expiration Date (MM/DD/YYYY)
George Cambero	3	S	9437	10/1/2019
Pedro Gutierrez	2	X	31650	2/1/2021
Jose Ramos	1	X	27540	7/1/2021
Rigoberto Martinez	2	X	27162	1/1/2021
Rigoberto Martinez	2	X	27162	1/1/2021
Daniel Perez	1	X	25437	12/1/2021

¹Use “C” for Chief Operator and “S” for Shift Operator. If neither, put an "X". Do not leave blank.

Do your Chief and Shift Treatment Plant Operators have the minimum level required? --Pick one-- Yes No No treatment facility except precautionary disinfection Don't Know

B. Please list the State certified Water Distribution System Operators employed by your water system that supervise and direct the operation
of your distribution systems, beginning with the chief operator(s) .

Your Distribution System Classification is: D5

Check this box if your public water system has designated a Chief Distribution Operator.

Name of Chief Distribution Operator (First name Last name):	Bret Kadel
Grade of Chief Distribution Operator (1, 2, 3, 4 or 5):	5
Distribution Operator Number (4 or 5 digits):	9253
Distribution Certification Expiration Date (MM/DD/YYYY):	5/1/2021

Distribution Operator Name (First name Last name)	Grade of Distribution Operator (1, 2, 3, 4, or 5)	Chief or Shift1 (C, S or X)	Distribution Operator Number (4 or 5 digits)	Distribution Certification Expiration Date (MM/DD/YYYY)
George Cambero	4	S	3090	5/1/2020
Victor Gutierrez	2	X	47506	11/1/2019
Christian Hernandez	3	X	40712	2/1/2021
Rigoberto Martinez	3	X	29328	1/1/2021
Jose Ramos	3	S	29270	2/1/2022
Pedro Gutierrez	3	X	35842	4/1/2020
Salvador Alvarez, Jr.	1	X	50744	11/1/2021

¹Use “C” for Chief Operator and “S” for Shift Operator. If neither, put an "X". Do not leave blank.

Do your Chief and Shift Distribution System Operators have the minimum level required? --Pick one-- Yes No Don't Know Not Applicable (transient non-community water system)

COMMENTS (Note: Comments will be made publicly available):

10. WATER SYSTEM IMPROVEMENTS

The California Waterworks Standards (Section 64556) require an amended permit for any of the following improvements or modifications:

• Addition of a new distribution reservoir with a capacity of 100,000 gallons or more
• Modification or extension of the existing distribution system using an alternative to the requirements of the
  California Waterworks Standards (see Sections 64570 through 64578)
• Modification of the water supply by:
  • Adding a new source
  • Changing the status of an existing source (for example, active to standby) or
  • Changing or altering a source, such that the quality or quantity of water supply could be affected
• Any addition or change in treatment, including
  • Design capacity
  • Process
• Expansion of the existing service area by 20 percent or more of the number of service connections specified in your current permit.

If your water system made any improvements or modifications during 2018 for which a permit was not obtained, please describe
the improvements or modifications below.
Upgraded Water Distribution Sites - Approved 12-20-2018

Indicate any planned improvements or modifications for 2019.
Add Emergency Generator to Well 8 Well 11 PCE & TCE Treatment System - Completion July 2019

COMMENTS (Note: Comments will be made publicly available):

11. COMPLAINTS REPORTED (WRITTEN OR VERBAL)

Type of Complaint	No. of Complaints Reported by Customers	No. of Complaints Investigated	No. of Complaints reported to the Division of Drinking Water or Local County Staff	Brief Description of Cause and Corrective Action taken
Taste and Odor	0
Color	25	25	0	Most issues were due to construction meters being utilized throughout system, hydrant knockdowns and color issues resulted in flushing of the system.
Turbidity	2	2	0	Sand - customer side water heater and a new main - flushed system
Visible Organisms		1
Pressure (High or Low)	3	3	0	Test pressure - customer side filter or usage issues
Water Outages1
Illnesses (Waterborne)
Other (Specify)
Total No. of Complaints*	30	31	0

¹These are customer complaints of a water outage and not necessarily the same as the water outages reported under “System Problems” in the Distribution Section of the EARDWP.
*Calculated field

COMMENTS (Note: Comments will be made publicly available):

12. RECYCLED WATER USE

Do you have recycled water in your service area (provided by you or another utility)?

--Pick one-- Yes No Don't Know

Recycled Water (RW) Use Sites	Total No. of Approved Sites as of Dec. 31, 2018	No. of New Sites Approved in 2018	No. of Sites Proposed for 2019
Irrigation, Agriculture
Irrigation, Landscape	5	0	0
Industrial
Dual-plumbed (In-building)	1	0	0
Dual-plumbed (Single-family lot)
Cooling Towers
Other
Total*	6	0	0

Name of the recycled water coordinator:	George Cambero
Business Phone:	310-603-0220 xt 804
Email address:	gcambero@lynwood.ca.us
How many inspections of recycled water use sites were conducted in 2018?	0
How many pressure/shutdown tests were performed in 2018?	0
Do all of your recycled water uses sites have an on-site supervisor?	--Pick one-- Yes No
How many recycled water uses sites do not have an on-site supervisor?	0

COMMENTS (Note: Comments will be made publicly available):

13. SYSTEM OPERATION - TREATMENT

A. GROUNDWATER TREATMENT (respond only if groundwater treatment is provided, exclude chlorination treatment)

Groundwater Treatment Plant Name	Treatment Process	Date of Operations Plan	Is Operations Plan Current? (Y/N)	Contaminant Removed

Describe any plant problems, process failures, major shutdowns, etc., which occurred in 2018 and substantially affected the plant performance AND/OR
any significant modifications or maintenance provided to the plant(s):

B. SURFACE WATER TREATMENT (respond only if surface water treatment is provided)

Surface water Treatment Plant Name	Date of Operations Plan	Is Operations Plan Current? (Y/N)

Describe any plant problems, process failures, major shutdowns, etc., which occurred in 2018 and substantially affected the plant performance AND/OR
any significant modifications or maintenance provided to the plant(s):

TD = Treatment or Distribution operator at any level

NR, N/A, NA = There are no facilities subject to the Certified Treatment Plant Operator requirements

Date of current Emergency Disinfection Plan (EDP)*:	4/01/2015
*As required under Section 64660(c)(2). The EDP may be included in your water system’s Emergency Response Plan or Operations Plan. If so, provide the Name and Date of those plans below:.
Name of Document that includes the Emergency Disinfection Plan:	Water Quality Monitoring Program Improvement Plan
Date of document that includes the Emergency Disinfection Plan:	04/01/2015
Date of last watershed sanitary survey report :
Date planned to complete next watershed sanitary survey report*:
*As required under Section 64665, each watershed sanitary survey shall be updated at least every 5 years.

COMMENTS (Note: Comments will be made publicly available):

14. SYSTEM OPERATION – DISTRIBUTION

A1. DEAD-END FLUSHING PROGRAM

Total No. in System	No. with Blowoffs	No. Flushed in 2018	Frequency of Flushing
30	34	30	Monthly

Comments on DEAD-END FLUSHING PROGRAM (publicly available):  

A2. ALL FLUSHING OPERATIONS

Units of Measure for total volume reported below:	--Pick one-- Gallons Million Gallons Acre-feet (AF) 100 cubic feet
Total Volume in units of measure selected above; include all types of flushing, not just dead-end flushing:	720000

Comments on ALL FLUSHING OPERATIONS (publicly available):  

B. VALVE EXERCISE PROGRAM

Size Range of Valves	Total No. in System	No. Exercised in 2018	Frequency of Valve Exercising
4" to 16"	2500	206	As Needed

Comments on VALVE EXERCISE PROGRAM (publicly available):  

C. STORAGE TANK/RESERVOIR INSPECTION/CLEANING PROGRAM

(Do not include pressure tanks)

Tank name	Capacity (in million gallons, MG)	Year installed	Date of last inspection	Date of last cleaning	Date re-lined or coated	Corrosion protection(*)	Material of construction
Reservoir	3	1965	2017	2017		None	Concrete
						--Pick One--
						--Pick One--
						--Pick One--
						--Pick One--
						--Pick One--

*Coatings and linings do not count as corrosion protection for table Subsection C.

D. SYSTEM PROBLEMS

Type of Problem	No. of Problems	No. of Problems Investigated	No. of Problems Reported to the Division of Drinking Water or Local County Staff	Brief Description of Cause and Corrective Action Taken
Service Connection Breaks/ Leaks	456	456	0	92% of these are rereads, which request check for leaks, property leaks are reported to resident, and city side leaks are repaired
Main Breaks/Leaks	3	3	0	Repaired Main Breaks - One caused by contractor
Water Outages	0	0	0
Boil Water Orders	0	0	0
Total*	459	459	0

Comments on SYSTEM PROBLEMS (publicly available):  

SECTION E AND F BELOW ARE ONLY FOR RETAIL COMMUNITY WATER SYSTEMS WITH >3,000 SERVICE CONNECTIONS OR SUPPLY >3,000 AF/YEAR

If you have questions about completing this section of the report, please contact Kartiki.Naik@waterboards.ca.gov or call (916) 319-9468.

The information in the section below will be used to help develop water loss performance standards for urban retail water suppliers, as required by SB 555 (2015).

E. INFRASTRUCTURE AND PRESSURE

Pipe Material in Distribution System

1. Which materials does your distribution system pipe consist of? Please check all that apply:

Plastic (Including Poly Vinyl Chloride and HDPE)
Steel
Cast Iron
Galvanized Iron
Ductile Iron
Cement Concrete
Asbestos Cement

Pipeline Material	Percentage of distribution pipe system composed of the materials selected above	Average Age (in years)
Plastic	4.9
Steel	0.2
Cast Iron	25.5
Galvanized Iron	3.3
Ductile Iron
Cement Concrete
Asbestos Cement	10.8
other:	55.2

2. Percentage of distribution system composed of pipes with a nominal diameter larger than 18 inches   %

Pressure Management

1. Into how many pressure zones is your distribution system divided? 1

2. Specify the minimum operating pressure, averaged across your distribution system, required to maintain minimum pressure requirements at critical pressure points in your distribution system as per the California Waterworks Standards (California Code of Regulations, Title 22, Division 4, Chapter 16, Article 8, §64602). 56 psi

Comments on the minimum operating pressure in Question 2 (publicly available)  

Comments on Pressure Management (publicly available):  

F. REAL LOSS REDUCTION MEASURES

1. Has your system implemented real loss reduction and detection measures (excluding pressure reduction) in the past five years? If yes, please check the box and proceed to (2)

If not, skip questions 2 and 3 below.

2. Check the box if Component Analysis been conducted for your system

a. Which year was the component analysis conducted? (YYYY)
b. What was the expenditure incurred? (Amount in $)

3. (a) Provide details on water loss measures implemented, if known.

Measure implemented for water loss detection
Measure		Implementation Level	Comments
Listening rods		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Ground microphones		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Hydrophones		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Leak noise correlators		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Leak noise loggers		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Inline acoustic devices		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Inline pressure devices		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Inline imaging devices		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Tracer gas		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Electromagnetic field detection		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
District Metered Areas		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Ground Penetrating Radar		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Thermography		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Satellite imaging		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Machine learning		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Step testing		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Visual surveys		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Reduced response time to fix breaks/leaks		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Meter testing		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Other		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked

Provide the following information for the prior five years (2014 through 2018):

5-Year Summary for Water Loss Detection Measures
Total Number of Leaks Detected from Year 2014 to 2017		98
Total Number of Leaks Detected (2014 to 2018) *
Net Volume of Water Loss Identified (2014 to 2018)
Total Expenditure Incurred for Detection Measures ($) (2014 to 2018)

*Total Number of Leaks Detected for each year is the sum of No. of Problems for Service Connection Breaks/Leaks and Main Breaks/Leaks reported on subsection D. SYSTEM PROBLEMS.

Comments on 5-Year Summary for Water Loss Detection Measures (publicly available):  

Select water volume units for the table below: --Pick one-- Gallons (Gal) Hundred Cubic Feet Thousand Gallons Million Gallons Acre Feet Not Applicable

Infrastructure renewal implemented for water loss reduction
Intervention	Portion of distribution system over which implemented (%)	Real loss reduced (Select unit above)	Number of leaks reduced	Expenditure incurred ($)	Not tracked	Comments
Repair
Rehabilitation
Replacement as a result of leak detection
Total estimates for all interventions as a result of leak detection

4. (a) Provide details on measures employed for monitoring operational pressure and pressure transients in your system, if known.

Measures implemented to monitor operational pressure and pressure transients
Measure		Implementation Level	Comments
Pressure loggers		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Hydraulic models		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Pressure transient loggers		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Other		--Pick one-- Planning Piloted Full-scale Not Considered Not Tracked
Enter total expenditure if known ($)

4. (b) Please provide details on interventions implemented to reduce operational pressure and pressure transients in your system, if known.

Intervention implemented to reduce operational pressure or pressure transients
Intervention	Portion of distribution system over which implemented (%)	Average pressure reduced (psi)	Expenditure for intervention used ($)	Not tracked	Comments
Pressure reduction/modulation
Booster pump stations
Reduced pressure during low demand
Pressure transient control devices
Other
Enter total expenditure if known

5. Provide the name of a contact person at your organization for water loss control programs (First Name, Last Name):  

Comments on real loss reduction measures employed (publicly available)  

COMMENTS (Note: Comments will be made publicly available):

15. EMERGENCY PREPAREDNESS AND RESPONSE

A. EMERGENCY RESPONSE PLANS

PUBLIC WATER SYSTEMS WITH AT LEAST 3,300 OR MORE PERSONS SHOULD REVIEW AND REVISE THEIR EMERGENCY
RESPONSE PLAN TO ENSURE THAT THE PLANS ARE SUFFICIENT TO ADDRESS POSSIBLE DISASTER SCENARIOS.

Do you have an Emergency Response Plan (ERP) that addresses the procedures for the restoration of water service for your water system?	--Pick one-- Yes No
Date of your current Emergency Response Plan:	4-5-2000
Date ERP was last exercised with a tabletop or other activity:	4-5-2000

B. AUXILIARY POWER SUPPLY

Does your water system have backup power for:
1. Sources:	--Pick one-- All Some None Not Applicable
2. Pumping Stations:	--Pick one-- All Some None Not Applicable
3. Water Treatment Plants:	--Pick one-- All Some None Not Applicable
If your system has backup power, how many times per year is it exercised?
Can your system maintain system pressure either by backup power or by storage during power outages of 2 hours or less?	--Pick one-- Yes No
Is your backup power system automatic or manual start?:	--Pick one-- Automatic Manual Start Not Applicable

COMMENTS (Note: Comments will be made publicly available):

16. WATER CONSERVATION AND DROUGHT PREPAREDNESS

Please list any other long term actions you are considering or planning:

Date of your revised Drought Preparedness Plan or Water Shortage Contingency Plan, if any:	9-15-2015
Units of Measure for this section:	--Pick one-- Gallons Million Gallons Acre-feet(AF) 100 cubic feet
If you experienced water shortages in 2018, please estimate the amount of shortfall in units selected for this section:	0
How many water-shortage response stages are in your drought plan? For “non-applicable”, enter zero.	--Pick one-- 0 1 2 3 4 5 6 7 8+
Did drought conditions cause you to activate emergency standby wells in 2018?	--Pick one-- Yes No Not Applicable (no wells)
Do you project water shortages in the current calendar year?	--Pick one-- Yes No
Did you implement NEW water conservation measures in 2018?	--Pick one-- Yes No
If you implemented NEW water conservation measures in 2018, please estimate how much water was conserved        volume of water in units selected for this section        % reduction in demand
Do you anticipate having to go to mandatory rationing in the upcoming year?	--Pick one-- Yes No

Identify the method your water system uses to discourage excessive water use in support of SB 814 (2016) :	(Check as applicable) Rate structure (e.g., block tiers, water budgets, or rate surcharges above base rates for excessive water use) Excessive water use ordinance, rule, or tariff condition Not implementing Not applicable: not an urban retail water supplier
COMMENTS REGARDING SB 814 (Note: Comments will be made publicly available) :

COMMENTS (Note: Comments will be made publicly available):

17. CLIMATE CHANGE ADAPTATION AND RESILIENCY FOR WATER UTILITIES

Per Waterboard Resolution 2017-0012, dated 3/7/17, water system inspections are required to address climate change impacts & concerns.

ONLY FOR COMMUNITY WATER SYSTEMS

Your water system classification is: Community Water System

If you have questions about completing this section of the report, please contact Joseph.Crisologo@waterboards.ca.gov or call (818) 551-2046.

A. CLIMATE THREATS
What climate-related impacts are of concern for your water system (check all that apply)? Drought Groundwater Depletion Water Quality Degradation Flooding Sea Level Rise Extreme Heat Fire Other None or N/A
B. SENSITIVITY AND MAGNITUDE OF IMPACTS
Qualitatively assess climate change sensitivity of your facilities, and criticality or consequence of disruption. Consider identified climate threats using past experience, and expert judgement based on the magnitude of expected change and extreme events in the future. You do not need numeric answers. USEPA provides a risk assessment tool, called CREAT, to help utilities identify which environmental changes can impact water supply: https://www.epa.gov/crwu/build-resilience-your-utility. More resources are available that may help you complete this section.
Drought | Groundwater Depletion	Decreased water storage (low lake and reservoir levels)	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Groundwater depletion (increased extraction, reduced groundwater recharge, etc.)	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Change in seasonal runoff and/or loss of snowmelt	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Region relies on water diverted from the Delta, imported from the Colorado River, or other climate-sensitive area	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
Water Quality Degradation	Salt-water intrusion into aquifers	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Altered water quality during storm events (turbidity shifts, debris flows)	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Surface water quality issues related to eutrophication, algal blooms, invasive species	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
Flooding | Sea Level Rise	High flow events and flooding	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Inundation due to sea level rise, high tides, and/or coastal storm surges	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Aging flood protection infrastructure (levees), or insufficient impoundment capacity	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
Extreme Heat	Peak demand volume surges (due to extreme heat, temperature trends, etc.)	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Increases in agricultural water demand or energy sector needs	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
Fire | Other Impacts	Increased fire risk and altered vegetation, e.g., wildfires	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Disruption of power supply	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
	Other	Choose an item --Pick one-- High or Already Experiencing Medium Sensitivity None to Low Sensitivity
C. ADAPTATION MEASURES
Identify measures to increase resiliency and reduce vulnerabilities based on identified water system sensitivities. Indicate status for all projects that your organization has completed or plans to implement to increase resiliency of the water system to climate change? Adaptation measures planned or achieved for reasons other than climate change should be put in the “Other” box along with the reason for the measure. USEPA’s Adaptation Strategies Guide for Water Utilities provides examples of adaptation: https://www.epa.gov/crwu/learn-how-plan-extreme-weather-events
Install new and deeper drinking water wells, or modify existing wells to increase pumping capacity		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Develop local supplemental water supply, enhanced treatment, or increased storage capacity (e.g. recycled water, storm runoff for groundwater recharge, desalination, new reservoir)		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Interconnection with other utilities (transfers, mutual aid agreements with neighboring utilities)		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Relocate facilities, construct or install redundant facilities		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Modify facilities (e.g., install barrier or levee, raise a wall, seal a door, elevate construction)		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Conservation measures (demand management, enhanced communication and outreach)		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Fire prevention – brush management, partnerships		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Alternative or backup energy supply		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
On-site energy generation		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Enhance monitoring program, budget for additional testing and treatment, chemicals		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A
Other		Choose an item --Pick one-- Completed In Progress Plan to Implement Will not Implement N/A

COMMENTS (Note: Comments will be made publicly available):

18. LEAD SERVICE LINE REPLACEMENT

ONLY FOR COMMUNITY WATER SYSTEMS

Your water system classification is: Community Water System

Section 116885 of the California Health and Safety Code, Lead Service Lines in Public Water Systems, added to the Health and Safety Code by Senate Bill 1398 (2016) and amended by Senate Bill 427 (2017), requires all community water systems (CWS) to compile an inventory of known partial or total lead user service lines in use in its distribution system by July 1, 2018. All CWSs will need to provide DDW an inventory form through this 2018 electronic annual report (eAR) explaining how the inventory was determined and the results. DDW is utilizing this 2018 electronic annual report (eAR) to gather and update this information.

IMPORTANT: In the 2017 electronic Annual Report, all CWSs were required to submit the lead service line inventory to the DDW. The INVENTORY TABLE below were PRE-FILLED with information provided in the 2017 eAR, please review the table below and take this opportunity to make changes and update your inventory. All pipe materials that does not apply to your system must not be left blank. You must enter zero, otherwise errors will be generated at the end of the eAR report.

The inventory must include all user service lines that are active and those that are reasonably expected to become active in the future. Also, Section 116885 requires that CWS identify areas that may have lead user service lines in use, and/or identify any areas within the CWS distribution system that the CWS cannot identify the material that is being used for the service line. If a CWS indicates the existence of lead user service lines or unknown material user service lines or lead/unknown fittings associated with user service lines, by July 1, 2020, the CWS will need to submit to DDW a timeline to replace all lead and unknown material user service lines. Please include the updated information on your user service line inventory below so DDW can track the progress of your system. For additional information, please visit

https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/lead_service_line_inventory_pws.html

If you have questions about completing this section of the report, please contact David.Pimentel@Waterboards.ca.gov or call (916) 323-0572.

If your water system is a wholesaler and your system contain no user service lines, you are not required to complete this form: Please check this box:

Date lead service line inventory was completed (MM/DD/YYYY):

10-24-18

A. User service line inventory:

"User service line" means the pipe, tubing, and fittings connecting a water main to an individual water meter or service connection.

Pipe Material		Estimated Number of Service Lines (Enter “0” if none)	Estimated Total Length of Service Lines (In feet), if applicable
A. Lead		0	0
B. Unknown material		9089	136335
C. Copper		0
D. Cast iron (ductile pipe)		0
E. Ductile iron		0
F. Galvanized steel		0
G. Polyvinyl chloride (PVC)		0
H. Polyethylene (PE)		0
I. High density polyethylene (HDPE)		0
J. Polybutylene (PB)		0
K. Transite/asbestos cement		0
L. Other materials not listed above:
Identify material 1		0
Identify material 2		0
Identify material 3		0
Identify material 4		0
Total number of service lines inventoried* (calculated field)		9089
Total number of service connections from Section 3 of the EAR		9089
Fittings or fittings connecting a water main:
M. Lead fittings NOT on a lead pipe(e.g., goosenecks, pigtails, and corporation stops)		0
N. Lead fittings ON a lead pipe (e.g., goosenecks, pigtails, and corporation stops)		0
O. Fittings of unknown material (e.g., goosenecks, pigtails, and corporation stops)		0
Total number of lead service lines** (calculated field)		0

*Total number of service lines inventoried (calculated field) = Sum of A through L

**Total number of lead service lines (calculated field) = Sum of A and M

To Update calculated field, click button below

B. Method(s) used to prepare the lead service line inventory in Part A (check all that apply):

Tap Cards or tickets from initial service installation
Plans from water main installation, rehabilitation, and replacement
Records indicating when buildings were constructed
Meter replacement records
Distribution maps, drawings, or GIS
Visual confirmation of pipe material by plumbers or utility crews during maintenance or installation activities
Interviews with water system personnel and/or past employees
Field investigations
Other (describe below):
Water Master Plan from 2004

Disclosure: Be advised that Sections 116725 and 116730 of the California Health and Safety Code
states that any person who knowingly makes any false statement on any report or document
submitted for the purposes of compliance may be liable for a civil penalty not to exceed
five thousand dollars ($5,000) for each separate violation for each day that the violation
continues. In addition, the violators may be prosecuted in criminal court and upon conviction, be
punished by a fine of not more than $25,000 for each day of the violation, or be imprisoned in county jail
not to exceed one year, or both the fine and imprisonment.